Saru48W+ rev1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saru48W+ rev1 My third keyboard designed from scratch, this time with Bluetooth connectivity.
- Ocena
- 0 / 5
- Polubienia
- 76
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 1771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Saru48W+ rev1
My third keyboard designed from scratch, this time with Bluetooth connectivity.
I wanted a more compact portable keyboard with Bluetooth connectivity and an encoder.
Different MCU, different firmware.
Components:
- 1x nice!nano (ZMK), USB-C and Bluetooth
- 1x 3.7V 503040 600mAh LiPo battery
- 48x switches
- 1x EC11 encoder
- 30x M2 5~6mm screws
- 6x M2 nuts
- 12x M2 10mm stand-offs
- 2x M4 Low profile brass heat inserts
- 2x M4 6~8mm Socket cap head screws
- 1x micro switch (power)
- 1x micro push button (bootsel, reset)
- 3D printed case, plate, feet
Repository:
https://github.com/slabua/keyboards/tree/main/saru48wplus
Firmware:
https://github.com/slabua/zmk-config-saru48wplus
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
100
Filament: PLA
/
Notes:
Supports only needed for the Case parts.
The orientation of the uploaded models is straight from the cad model, always print with the larger surface facing down.
Post-Printing
I did not add a bracket to hold the battery, use double side tape as necessary.
Some Photographs
Build process
CAD renders
Category: Computer