Modified RAM Phone Holder Base + Stand | Toyota FJ Cruiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the "Diamond Plate" and gave it a flat surface, and made a small stand to roughly fit the interior of the FJ
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: combined the ram arm with the support, as in the original design the screw cannot be tightened all the way.
- Material: PETG/ASA/ABS
- Layer Height: 0.2mm
- Infill: 50-70%
- Parameters: at least 4
- Support: optional
INFO
Wanted to use an existing mounting pad from my old phone holder, so I remixed the "Diamond Plate" and gave it a flat surface.
Also, used longer arms (can be found here: https://www.thingiverse.com/thing:267879), and made a small stand to roughly fit the interior of the FJ Cruiser, and to support the phone holder.
For hardware I used M6 screws and nuts, and for the nut knob I couldn't find the link to the ones I used, many other models can be found throughout the website.