Modified RAM Phone Holder Base + Stand | Toyota FJ Cruiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed the "Diamond Plate" and gave it a flat surface, and made a small stand to roughly fit the interior of the FJ
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
UPDATE: combined the ram arm with the support, as in the original design the screw cannot be tightened all the way.
- Material: PETG/ASA/ABS
- Layer Height: 0.2mm
- Infill: 50-70%
- Parameters: at least 4
- Support: optional
INFO
Wanted to use an existing mounting pad from my old phone holder, so I remixed the "Diamond Plate" and gave it a flat surface.
Also, used longer arms (can be found here: https://www.thingiverse.com/thing:267879), and made a small stand to roughly fit the interior of the FJ Cruiser, and to support the phone holder.
For hardware I used M6 screws and nuts, and for the nut knob I couldn't find the link to the ones I used, many other models can be found throughout the website.