Ikea enclosure temperature display mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a quick way to see how warm the inside of my enclosure is, so i quickly designed this mount in Fusion 360.…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 156
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a quick way to see how warm the inside of my enclosure is, so i quickly designed this mount in Fusion 360.
The mount screws in with 2 screws into my Ikea platsa enclosure but most likely will fit most ikea storage shelfs.
The temperature monitor is from clasohlson but can be found with different brands around the internet.
https://www.clasohlson.com/fi/p/36-3392
All the files should be in the correct orientation for printins. Took me around 1.5h all together to print the 2 parts with 0.2 resolution on Ender 3 pro with PLA.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%
Filament: Clas Ohlson PLA Gray
Category: 3D Printer Accessories