Box for Bosch Zamo 3rd Gen with accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Box for the Bosch Zamo 3rd Gen laser measure with 3 accessories
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 100
- Wydruki
- 6
- Wyświetlenia
- 862
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a box for the Bosch Zamo 3rd Gen laser measure and its 3 accessories (tape, wheel and line adapter). The lid snaps on firmly and the parts are easy to take out.
After i printed my box i added a little cutout to the pocket of the wheel adapter to improve access to the Zamo and some chamfers around the pockets.
Designed by me in Fusion 360. If you printed this and have ideas for improvements please tell me. I'll not reprint for now for just the slight improvements i made after printing.
Print settings:
I went for 0.15mm over 0.2mm for no particular reason, i think you will be fine with 0.2mm. I used a brim because v1 had slight problems with warping that impacted the fit of the lid. I used 10% cubic infill. Aside from that i used the settings of the standard Prusa profiles.
Printed from DAS FILAMENT PLA, Black and Neonorange.