Skadis folding rule holder utilizing skadis T-nut-system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek and supportless folding rule holder for 2m folding rules. Use a t-nut for mount on the skadis board.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 108
- Wydruki
- 4
- Wyświetlenia
- 448
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My folding rule holder with a printed integrated mount broke so many times I cant cout anymore.. so I thought of designing one using these very nice M3 t-nuts from ORM_649441
(https://www.printables.com/de/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un) to have something sturdy that won't break! Could't find a folding rule holder so i made one myself!
Print this standing upright and you can print it without support if your printer can whoop the 17mm brigdge on the front. Apart from that all overhangs are easily printable and will have you pop this out in no time! It has a nice snug fit on the rule so it doesn't sling around. On the back there are extrusions fitting into 2 vertically oriented holes from the skadis pegboard to mount it stable.
Print one of the T-nuts and use a 10-12mm M3 screw! If you really need a countersunk version let me know, I used a flat screw head. Happy for any Feedback!