DJI Mavic Range Extenders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created range extenders for my Mavic Pro.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the design for parabolic reflectors for a DJI Mavic Pro (original). I assume that it will fit other DJI drone controllers as I think most of them use the same antenna design.
It can be printed in a single piece with no supports or different materials.
It has a parabolic design and uses the metal from an aluminum can as reflectors.
After printing, I used a piece of paper to determine the size of aluminum can reflector needed by placing the paper into the slot until it fits, then tracing the paper onto the inside of a can. Cut out the can and slide it into the slot.
Looking forward to testing the improvements once it warms up.