Heltec Wireless Paper Case for Meshtastic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Heltec Wireless Paper
- Ocena
- 4 / 5
- Polubienia
- 35
- Pobrania
- 232
- Wydruki
- 2
- Wyświetlenia
- 4183
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a simple case for the Heltec Wireless Paper LoRa, focusing on a slim profile. The design of the buttons was particularly challenging, as they are located beneath the battery. This issue was resolved with a special bracket. Interestingly, when using white PLA for the case, the light from the device creates a pleasant glow effect. Assembly details can be seen in the pictures.
With the recent screen issue fix in the Meshtastic app, this case becomes a viable alternative to the Heltec ESP32 V3 for those who prefer not to add anything but a battery. It's more affordable, features an elegant E-ink display, and consumes less power.
Update 01/25/24: Closing required quite a bit of strength, I made the torelance lower so it's easier to close. Also added locking on the anthena side.
Details:
Board: Heltec Wireless Paper
https://heltec.org/project/wireless-paper/ $14.90 + Shipping
https://www.aliexpress.us/item/3256805461611876.html?channel=twinner $15.05 Free Shipping
Battery: 1100mAh 47x28x7.8mm
https://a.co/d/2Ovhuod $19.99
This design isn't perfect, but it's a functional solution until other cases become available.