Mini ITX case for 10 inch rack V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U shelf to mount a mini-itx motherboard in a 10 inch rack cabinet. V2
- Ocena
- 5 / 5
- Polubienia
- 231
- Pobrania
- 1503
- Wydruki
- 2
- Wyświetlenia
- 13 339
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
2U shelf to mount a mini-itx motherboard in a 10 inch rack cabinet.
Do not print in PLA. The heat and the weight WILL eventually deform it.
Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.
I printed it in PETG with the front plate laying on the bed and no supports. The extra piece is a bracket for mounting low profile PCIE cards. It has to be screwed on the front plate with two M3x12 mm (or longer) screws.
It supports a 12mm momentary switch, and a 2x USB3.0 ports connector.
UPDATED:
This is the second version of this model. It now supports 2 slots pcie cards and an additional single slot pcie card on the top.