1 / 3
DJI Matrice M30T Drone Spare Battery Carrier — zdjęcie 1
1 / 3

DJI Matrice M30T Drone Spare Battery Carrier

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A carrier to keep two batteries in

Ocena
0 / 5
Polubienia
4
Pobrania
60
Wydruki
0
Wyświetlenia
880
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a way to transport and store my 7th and 8th battery for my thermal drone. The case for the drone only hold 6.  This is printed in PLA. As I found out today, PLA shrinks when its -3F and a wind chill of -28.  I would highly recommend that you scale this up to 101 or 102%. My warm batteries have a very snug fit in this carrier.  

I lightened up and tried to make the model so that it uses less filament .  I printed it with no supports. It took 21 hrs on my Prusa MK3+. 

I am not sure if the DJI M350 or other batteries will fit. You can probably remix it or re-scale it for other uses. 

Let me know of you print it with a .6 nozzle and what your print times are.

If you remix it, please let others know your settings and how it worked. Please don't remix it to sell it. 

Printed on a Prusa MK3+ with a .4 Revo hot end nozzle. 

Generic PLA slicer settings

20% infill

Gyroid 

Jesse - Printed Solid PLA

 

 

Tagi