Beskar Spear for Big Bricks Mandalorian
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LEGO-inspired spear for the Big Bricks Mandalorian Figure
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 999
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
This is an accessory for Jacob Cardwell's BIG BRICKS - Mandalorian figure. Please have a look at his awesome model.
Printing instructions:
The spear is easy to print. Just put everything upright onto the buildplate with a 5mm brim to ensure stability. Some adhesive is recommended.
You can try to print the pins from a sturdier material like PETG. I used Silk PLA and they broke too easily due to poor layer adhesion, even with 50% cubic infill.
Assembly:
Be - very - careful when pushing the parts together with the pins inbetween. The pins tend to break when you don't push straight. If a pin breaks, just keep pushing the parts completely together and then glue them. It's not as nice but works.