Beskar Spear for Big Bricks Mandalorian
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LEGO-inspired spear for the Big Bricks Mandalorian Figure
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 130
- Makes
- 1
- Views
- 999
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
This is an accessory for Jacob Cardwell's BIG BRICKS - Mandalorian figure. Please have a look at his awesome model.
Printing instructions:
The spear is easy to print. Just put everything upright onto the buildplate with a 5mm brim to ensure stability. Some adhesive is recommended.
You can try to print the pins from a sturdier material like PETG. I used Silk PLA and they broke too easily due to poor layer adhesion, even with 50% cubic infill.
Assembly:
Be - very - careful when pushing the parts together with the pins inbetween. The pins tend to break when you don't push straight. If a pin breaks, just keep pushing the parts completely together and then glue them. It's not as nice but works.