Fidget Toy Switchblade Folding Comb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of OwenTF’s toy switchblade knife to make it a comb.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 1979
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Comb blades for the folding switchblade from Owen TF’s design.
The blades should be printed with a brim in the orientation they load in. The handles should be printed with the bottoms (opposite end of tip of blade when opened) on the print bed. Cap, Button, and Tension Screw should be printed with flat side on build plate, threads up.
There are blade versions with built in supports that worked great, but I also included unsupported versions if you want to add your own supports in your slicer.
On a bed slinger I would rotate the blade to be parallel with the axis that moves so that it doesn't fall over while printing. Printed great on my X1c
Only the blades were remixed, the other parts are just re-uploaded from the original file.