Amazfit Balance charger stand - Swan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bit unusual charger stand for Amazfit Balance (and bands / watches using the same charger)
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 1575
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Bit unusually shaped charger for Amazfit Balance and all the other watches using the same charger. From side, it looks like a bit like a swan, so it got its name.
Watch should fit nicely at the “head” of this holder and back can be used to hold some small things if needed.
Print this model on laying on left side (one with cable plugs) and use supports for hole for charger body. Do not forget to remove supports properly, as you may scratch charger if some pieces of support will remain on model. No other special settings should be used for printing.
I printed this model with cheap matte black PLA, so it was stringy and you can scratch it even with your fingernail, so photos are not the best sadly.
Feel free to modify model for other types of bands / watches.