Microflame Torch prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seen in Star Wars original trilogy as well as in more recent shows.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is based off of the real product, Microflame Torch which is used by Jawas and Luke Skywalker to repair droids in episode 4. It's also seen used in the more recent show Andor by Bix Caleen.
I am also working on having it modeled completely seperated, so you can “replace” the gas canisters and perhaps also rotate the “valves”, this is still wip though. Will add later when it is done and tested.
Gas canister is added already as this can be used for “replacements” on belts etc.
The “nozzle” is printed seperatly so that you can rotate it.
I printed this in Tough 2000 on a Form 3 resin printer and the nozzle held up fine being pressed in place. If you're printing on an FDM printer, it could be an issue depending on orientation.
I took the liberty to add the text that is on the actual product but remade it to Aurebesh to fit the Star Wars universe.
If you want more Star Wars tools and props click here!
*EDIT: I've now added a more realistic version split into each section so that you can remove or replace the gas cartridges.
I also added another type of “clip” to the nozzle for easier assembly.