Liczymy pasujące modele…
Simple JAWA FJ keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to print using 0,4mm…
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
A new 3D figurine generated by AI, a Chibi Jawa (Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Velikost magnetu 10x2mm. Používám obyčejné vteřinové lepidlo k uchycení magnetu a drží velice dobře. Tisk z černého + červeného PLA ale i samotná černá barva nevypadá vůbec špatně.
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Hi guys, this is the model of beautiful and legendary czechoslovakian 50cc moped, it's easy to print and it comes in multiple scales. This "bike" maybe isn't very…
Tested and printed without issues using Cura slicer. Hi guys, this is the model of Positionable figure of a Cartoon Czechoslovakian biker in 1/18 scale, fittable for my Jawa 50 moped (1/18). Always remember: Print, Dry fit, File, Dry Fit…
klíčenky jsou vytvořeny pro průšu s MMU nebo bambulabku s AMS k vybarvení používám prusaslicer, funkci chytré vybarvení klíčenky loga československé firmy jawa, která vyráběla motocykly a automobily první model je staré logo JAWA, ve…
0.12mm layer height, 2 walls, 100% infill, white PLA, without support Powered by MakerWorld-Make My Lithophane (https://makerworld.com/makerlab/makeMyLithophane) Photo by @vitous.vodicka
Pro testovací jízdy před namontováním tachometru. Staré lanko uštípneme, sundáme plastovou objímku se závitem, vložíme do něj plastovou krytku a vrátíme na motor. Náhon tachometru je nyní chráněn před nečistotami…
This is a set of pieces that can be used to recreate a Jawa figure at 500% scale. This figure was introduced as part of the Sandcrawler set published in 2005. There have been several variations of the Jawa mini-fig released over the years…
Origo návlečky jsou z pryže, já užívám měkčený plast. Na fotkách se návlečka leskne, ale písmo je dobře čitelné.
Design is to be printed out in separate parts in the corresponding colors to eliminate the need to paint. This also allows everyone to be able to print this design regardless of what printer you are using. Combining a Jawa and Shy Guy…
Gas can cap I made for my father for his Jawa 555. Has a hole to let air in. Printed in PETG, but I can't find any photos unfortunately. You can also change the variable layer height to make it a bit prettier. Printed without supports.…
Simple JAWA keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to print using 0,4mm…
Simple JAWA Považské Strojárne keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to…
Simple JAWA FJ keychain. dimensions: 50x28x3mm, hole diameter 4,5mm best to print with PLA or PETG filaments if printing at 0,2mm layer height and want two color keychain, set up pause at layer 11 to change color best to print using 0,4mm…
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
Korálky Jawa dvě možnosti. Přidal jsem ještě korálky s oboustranným logem. Jawa beads two options. I also added beads with a double-sided logo.
To celebrate Star Wars Day, Serev3d is coming out with our favorite little scavenger, Jawa! These creatures from Tatooine are small humanoids completely hidden behind their brown robe to only let us see their glowing yellow eyes. 🌠Candle…
Víčko nádže na pařez (JAWA 555) Tisknout z materiálu PA(nylon), vysoká odolnost vůči benzinu.
These fonts are free to use from fonts.google,com but I’ve already converted them into STL files for you. So you don’t have to spend time making them yourself. Feel free to download and use them as you like. 🔤 This is a small sample set…
I found this picture of a Jawa one day when I was scrolling through Pinterest (best place to find modeling inspiration). At the time, I didn't have the skills to create the vision I had in my head. But after a few months of practice and a…
použité magnety 20x6x2 6x3 vrtstva 0,15 tryska 0,4 core one filament Ultafuse 85A
Jawa motorbikes keychain. Quick print, with two color changes and 0.1 mm height it takes around 15 minutes to print.
Patice žárovky zadní svítilny (sufid) Jawa/Čz Tištěno z Pet-G
Template sign for JAWA 23 Mustang on fuel tank. Left and right sign of fuel tank.
Meet Jawa Claus , the most unpredictable Santa in the galaxy. He doesn’t deliver gifts—he salvages them. He doesn’t ho-ho-ho —he UTINNI!!! 🎅⚙ Wrapped in a sandy-red desert Santa coat, fluffy Tatooine trim, glowing LED-style eyes and a…
Obal na svíčku jawa 250-350/Spark plug cover for Jawa 250–350
Jawa cover for light bulbs, 1 big 4 small and 2 fuses Krabička JAWA na 1 velkou a 4 malé žárovky a 2pojistky
A new 3D figurine generated by AI, a Chibi Jawa (Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Jawa pionier 50 05/20/21 stahovak spojky aka "Montážný kľúč spojky primárneho kola"
Klíčenky Jawa, Jawa FJ, JawaČZ, Iseki, Trabant, Babetta, Zetor, Liaz Doporučuji material PCTG nebo PETG.
Velikost magnetu 10x2mm. Používám obyčejné vteřinové lepidlo k uchycení magnetu a drží velice dobře. Tisk z černého + červeného PLA ale i samotná černá barva nevypadá vůbec špatně.
Jawa emblem optimized for 0,2 nozzle You can find the instructions and the base of the lid here:
Three rainbows of JAWA keychains. PETG or PCTG material. PS. The white/black version also looks good.
This is my interpretation of a Jawa Shuttle Scooter. I saw an image of a scratch built Jawa vehicle made from scavanged parts by Psyfool Rulez Customz ( https://www.facebook.com/PsyfoolRulez-Customz-729005890478746/ I've included his…
Model of Czech motorbike Jawa 250 (cca 1960). It's semiscale, it's not perfect shapes as original. movable wheels and steering . For spoke use 0,6mm steel wire and montage in pripravek_kolo.stl. some M2x6 screw fot complete and CA glue.…
A perfect fit fuel knop/switch for the jawa babetta 207 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 13 Infill: 100 Filament: 3DE PLA RED Category: 3D Printing
Jawa Motorcycle Engine Cover Nut This nut was intended to look like the original Jawa 250/350 nut. You can buy different black ones today in many shops, however, it's not what it looked like in the past. There is a space for metal nut and…
Legendary moped Jawa 50/21 Pionyr from Czechoslovakia 1967-1978. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift! https://www.buymeacoffee.com/mochr
Legendary moped Jawa 50/23 Mustang from Czechoslovakia 1969-1982. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift!
Jawa 500 OHV – Rumpál, byl první motocykl značky JAWA. Motocykl byl vyvinut německou firmou Wanderer (model K 500), poté byly odkoupeny práva p. Janečkem, a tím vznikla značka JAWA – JA neček – WA nderer. Motocykl měl čtyřdobý, vzduchem…
Replica of speedometer for Jawa 250 and 350 motorcycles. 120kmh and 140kmh variant.
Zdar. Šablony tisknu z filamentu Flexfill 98A,aby byly pružné a přilnuly k povrchu. Před přiložením potřít zadní stranu lepicí tyčinkou na papír (Kores).Pečlivě přitisknout,okolí zamaskovat.Stříkat jemně tenké vrstvy,aby barva nepodtekla…
Je třeba z kvalitního zalamovacího nože š.18 uřezat flexou plátky a přesně je zabrousit do drážek většího dílu.Měly by se v rozích pěkně dotýkat.Před vložením jěště naostřit z vnější strany i boční strany.po vložení zakápnout…
I was in need of a magazine for the Ion blaster of the Jawas, that could also contain the batteries for the LEDs and sound system (a couple of triggers will activate sound + lights). As it was not possible to find a ready made solution, I…
For assembly you will need a thin cloth pice, tape/ziptie/rubber band, m4 20 screw and bolt. DO NOT PRINT OUT OF PLA!!! or it may melt.
Replacement covers for the package holder on an old Jawa moped. Print one for the whole cover if you have a big printer, or two halfs and glue them together. I made the small dowels that hold it in place separate to be glued in after, to…
Also made an adapter so you can sand them easily by attaching it to an electric drill and sand with a sander or sandpaper.
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Hi guys, this is the model of beautiful and legendary czechoslovakian 50cc moped, it's easy to print and it comes in multiple scales. This "bike" maybe isn't very…
Tested and printed without issues using Cura slicer. Hi guys, this is the model of Positionable figure of a Cartoon Czechoslovakian biker in 1/18 scale, fittable for my Jawa 50 moped (1/18). Always remember: Print, Dry fit, File, Dry Fit…
In the vast desert of Tatooine, where scavengers roamed in search of discarded treasures, there lived a Jawa with an uncommon passion. This particular Jawa had a fascination with technology that extended beyond the typical scavenging for…
Print settings: Rafts: No Supports: No Resolution: 0.20 / 0.16 / 0.12 / 0.10 mm Infill: 100% Notes: Printed with 0.4mm nozzle, resolution 0.16mm on Ender 3 I had to change the color of the filament during the print i slowed down the print…
Amar Jawan Jyoti is a memorial in India that honors the soldiers who fought in the 1971 Indo-Pakistan war.
Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…
It is primarily a beer coaster, but there are no limits to its use.
Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…
Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…
Here you are the 4th part of my Jawa-ČZ 250/353.02 build. Hope the 3rd part was fun for you :) https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo The 4th sequel is quite comprehensive, so pay…
Bracket for holding regulator for Jawa/Cezeta motorcycles
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s 3 bolts m2 x 20mm 2bolts m2 x 6mm With the cooperation of @mochr, I have given the Jawa 500FL…
Here you are the 5th part of my Jawa-ČZ 250/353.02 build. Hope the 4th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com The 5h part consist a big…
KeyChain: Jawa, čz, tatra, zetor, teamplate, Trabant, Tatra
Replacement gears for PAL speedometer/odometer often found on old SKODA cars and JAWA and CZ motorcycles. Print in ABS. <0.4mm nozzle recommended Enjoy! Category: Replacement Parts
Here you are the 6th part of my Jawa-ČZ 250/353.02 build. Hope the 5th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com…
I made the back of the FPV drone, to place the VTX socket and ELRS antenna. Fit for Rajawali Fold 7
Here you are the 7th part of my Jawa-ČZ 250/353.02 build. Hope the 6th part was fun for you :) https://www.printables.com/cs/model/802455-project-jawa-cz-kyvacka-25035302-part-no6-rear-mud As usual the model part consist a big parts but…
