1 / 2
Gridfinity metric drill holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 19 drill bits - 1 to 10mm in 0.5mm increments.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 661
- Wydruki
- 5
- Wyświetlenia
- 2274
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (169)Powiązane
Highlights
- A simple Gridfinity holder for a set of metric drill bits.
- Storage for 19 drill bits, from 1mm to 10mm, in 0.5mm increments.
- 0.5mm clearance on each hole for easy insertion.
- Occupies a 3x1 Gridfinity footprint.
- Holes are labelled, but I've included a version without labels if you prefer not to have them, or have another method of labelling.
- Labels look best when printed with two colours. I printed black text on an orange body (see photos). I don't have an MMU, but PrusaSlicer was smart enough to reduce the number of filament changes to two, for two layers of text.
- Included a sample 3mf project that's set-up for two-colour printing.
- I used Sunlu PLA+, with mouse ears on the corners to reduce warping.
Model
- FreeCAD model file is included in case you need to tweak.
Origin
- Model uses the FreeCAD Gridfinity base found in the Gridfinity Master Collection.