1 / 5
CHINS LiFePO4 12V 20AH Lithium Battery Mount — zdjęcie 1
1 / 5

CHINS LiFePO4 12V 20AH Lithium Battery Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CHINS LiFePO4 12V 20AH Lithium Battery Mount

Ocena
0 / 5
Polubienia
5
Pobrania
38
Wydruki
0
Wyświetlenia
450
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Battery Mounts for securing a CHINS LiFePO4 12V 20AH Lithium Battery vertically. I originally made brackets to hold the battery on its side, but also needed to hold the battery vertically and that's where this model came from. I used 2 of the horizontal brackets connected with a gusseted shelf to take the weight and support the battery. The top is secured with 2 of the original brackets. The brackets have a 2mm clearance on the battery to leave room for a bit of foam tape (affiliate link). The foam I used was about 6mm, this gave good compression when screwed down and keeps the battery secure. 6 holes sized for #8 pan head screws in each bracket. This was printed in eSun PLA + vertically with support