CHINS LiFePO4 12V 20AH Lithium Battery Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CHINS LiFePO4 12V 20AH Lithium Battery Mount
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Battery Mounts for securing a CHINS LiFePO4 12V 20AH Lithium Battery vertically. I originally made brackets to hold the battery on its side, but also needed to hold the battery vertically and that's where this model came from. I used 2 of the horizontal brackets connected with a gusseted shelf to take the weight and support the battery. The top is secured with 2 of the original brackets. The brackets have a 2mm clearance on the battery to leave room for a bit of foam tape (affiliate link). The foam I used was about 6mm, this gave good compression when screwed down and keeps the battery secure. 6 holes sized for #8 pan head screws in each bracket. This was printed in eSun PLA + vertically with support