SKÅDIS Topology optimized pliers rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really over engineered pliers rack for the IKEA SKADIS wall storage system using Skadis T-Nuts with 2.5mm screws
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 630
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a simple solution to store my pliers and clamps on my IKEA SKÅDIS wall storage. I really wanted to try out the topology optimization of CREO. So I went out let it design by itself.
I used the T-Nut System of 6d6178 with M2.5 Nuts. Please refer to his design for the missing nuts.
I used a stainless steel rod from the hardware store with a 10mm diameter to connect both holders. You can modify the width of the rack just by picking your desired length of the stainless steel rod. Please keep in mind the spacing of the holes of the Skadis system. Just pre-mount the 2 holders and measure (twice :) ).