Suunto Pedestal Compass cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover for a Suunto D-135 (??) compass for sail boats
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The Suunto Pedestal Compass (D-135??) is a much used model on sailboats. It comes with a plastic cover that may suffer some wear and tear during its lifetime. Here's a design I made based on a slightly damaged original cover. You can print it in PETG or any other durable plastic to replace a broken piece. I made the design purely based on measurements I took from the original, it's not a scan.
It prints nicely in white PETG with 0.2mm (variable layer size) and the input shaper in Prusa Slicer. It still takes some time to print it (~9 hrs). This is caused by the supports needed to hold up the top walls. But you'll find that the supports are easily removable.