1 / 4
Adapter for Food Mill To Cordless Screwdriver (Akkuschrauberadapter für Flotte Lotte) — zdjęcie 1
1 / 4

Adapter for Food Mill To Cordless Screwdriver (Akkuschrauberadapter für Flotte Lotte)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter to attach a cordeless screwdriver to a food mill. You need a 14 mm hex nut adapter for your screw…

Ocena
0 / 5
Polubienia
4
Pobrania
25
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This is an adapter to attach a cordeless screwdriver to a food mill. You need a 14 mm hex nut adapter for your screw driver from your socket set/ratchet box.

The inspiration came from this video: https://www.youtube.com/watch?v=znWpehnHmes

Hints:

  • Check out the Print Settings hint before printing.
  • PLA is not dishwaser safe
  • Hold the torque tool straight. If you have an angle between the tool and the food-mill, the nut will break off (already experienced this...it's plastic not steel)
  • This is only suitable for rather liquid things like tomato sauce. If you process e.g. fruits like plums, you need to turn 2-3 rotations foreward and a half backward to sort things back. In this case do it manually.
  • I added a cable tie to ensure proper stability (see picture)

AKKUSCHRAUBERADAPTER für die FLOTTE-LOTTE

  • Druckhinweise bitte beachten
  • PLA ist nicht Spülmaschinenfest (aber halt praktisch zu drucken...)
  • Es wird noch eine 14mm aus dem Ratschenkasten benötigt.
  • Akkuschrauber genau senkrecht halten sonst bricht der Kopf mit der "Mutter" ab - das ist halt einfach Plastik und kein Stahl)
  • Nur für eher flüssige Dinge wie z.B Tomatensoße geeignet. Ich hab' mal versucht Marmelade mit Kernobst damit zu machen, da stößt man aber schnell auf das Problem, dass man nach 2-3 Drehungen vorwärts auch mal eine halbe Drehung zurück machen muss um das Obst neu unter die Schaufeln zu bekommen.
  • Ich habe am Fuß noch einen Kabelbinder rumgelegt um sicher zu gehen dass das auch hält.

Print Settings

Printer:

Anet Clone

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

Shaft: 30-50%, Outside cover: 80+%

Filament:

n/a PLA

n/a


Notes:

Print outside cover upside down with support and infill > 80%.
Inner shafts are not that critical, infill 30-50% is fine.

How I Designed This

I used OpenScad to design this.

Category: Kitchen & Dining

Tagi