1 / 2
Mini Table Saw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very useful mini table saw for hobbyists
- Ocena
- 4,333 / 5
- Polubienia
- 438
- Pobrania
- 2710
- Wydruki
- 3
- Wyświetlenia
- 11 137
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (1)Kolekcje (509)Powiązane
Many parts of the circle saw are designed for PLA (PLA+ or Tough PLA is recommended) filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video.
Apart from the standard settings, those required for the parts to be printed are stated in the part names.
Settings not specified are standard slicer settings. A layer of 0.2 or 0.30 is suitable.
The names and links of the materials required for the table saw are in the detail section below the video.