Headphone Bear Ears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a set of Bear Ears that attach to a pair of headphones using some short strips of Velcro.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
These Bear Ears attach to the headband of almost any pair of headphones. They only need lengths of 20mm Velcro (2 sided hook and loop that attaches to itself, commonly used for cable management) and attached around the band. They come about 40mm wide to fit on my G Pro X headset, but you can adjust the Z axis scaling in the slicer to fit any headband width.
Additional Materials: Self-attaching Velcro Tape (It-Tape, Wrap-It, or Velcro ONE-WRAP)
Prints fine without supports, with the backside facing down.
10% or more Infill, any layer height or material should work.
Z-Axis can be scaled for various headband widths.