Headphone Bear Ears
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.07 – €3.75 net (excluding VAT)
For file: Headset Ears (Bear)_0.4n_0.2mm_PLA_MK4S_2h26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.41 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 2.43 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are a set of Bear Ears that attach to a pair of headphones using some short strips of Velcro.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 75
- Makes
- 1
- Views
- 335
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
These Bear Ears attach to the headband of almost any pair of headphones. They only need lengths of 20mm Velcro (2 sided hook and loop that attaches to itself, commonly used for cable management) and attached around the band. They come about 40mm wide to fit on my G Pro X headset, but you can adjust the Z axis scaling in the slicer to fit any headband width.
Additional Materials: Self-attaching Velcro Tape (It-Tape, Wrap-It, or Velcro ONE-WRAP)
Prints fine without supports, with the backside facing down.
10% or more Infill, any layer height or material should work.
Z-Axis can be scaled for various headband widths.