IKEA RIBBA Frame Hook/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer Hook for IKEA RIBBA Frame
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 207
- Wydruki
- 3
- Wyświetlenia
- 2229
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changes Version 2.4
Added Length to Filename. Its from inside the lower hook to the top of the upper hook. Should be distance between the teeth of the metal piece on the frame, to the inner side of the frame.
Added 100mm Version
Added rounds/fillet to the inner side of the hook.
V2.3 or V2.4 20mm Should fit the 13x18cm (5x7") frame
I usually use the small nylon hooks from hardware store (Last picture). But the IKEA RIBBA Frame is too deep so it's not possible. I had no longer hooks or nails at home so I made a longer hook/holder.
Just bend the metal piece on back side of the the frame a bit so you can clamp the holder to the frame and it won't fall off when you want to hang it to the wall.
My Print Settings (Print the way you want, doesn't really matter)
0.25mm DRAFT Setting for PrusaMINI in PrusaSlicer
Infill: 10%
Filament: Prusament PLA Jet Black
Orientation: On side (Should be like that in the STL)