VESA to LG Quick-release Stand Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter lets you use an LG quick-release display stand on any VESA-compatible (75mm or 100mm) display.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 339
- Wydruki
- 1
- Wyświetlenia
- 2210
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter that lets you place any VESA-compatible PC/TV display on an LG quick-release stand.
We purchased an LG UltraGear 45" OLED Gaming Monitor (45GR95QE-B) and did not need its stand, but we had another display that did need one. However, the LG monitor came with a quick-release mount without VESA screw holes even though it had VESA dimensions. Now we can use the stand with any monitor.
The models are designed to be printed using the following settings:
- ESUN PLA+ (other filaments could work, but ensure they're suitable for structural components)
- 0.4mm nozzle
- No supports
- 2mm+ walls
- 70% infill (triangles)
- Orientation: Print with largest surface area facing the bed.
In addition, you will need:
- 4x Brass M4 heat insets
- 4x M4x8 bolts (longer is fine) to secure the quick release
You can actually get away with just using the two bottom screws, but I used four just in case
Disclaimer: Print and use this at your own risk. I have used this model for about a month now with no issues whatsoever. Make sure you're familiar with your print settings and material properties before risking expensive equipment.
If you like this model and found it useful, please consider clicking the “Like” button so I can eventually get some Prusa filament and prototype more things! Thanks 😉