Monitor Mount for Qube500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this design for a "Travel PC" idea I had.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Merged the dovetail pieces together for the 100x100 Vesa plate found here-
https://www.printables.com/model/306732-vesa-plate-100x100-for-multifunction-arm-mounting
Print in orientation that is shown
Also made a very short full sized arm to hold the monitor.
***The pieces are based off the large arm models, not the small arm system!***
Enjoy!
Printed on: Ender 3 S1 (Klipper)
20% infil
0.2 quality
I used snug supports with a sheathe for the dovetail piece and base that attached to the PC case.
The base plate will take a bit of force to get seated, but holds a 24" monitor well!
