Klikring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable keychain that is all fully printed, including the ring
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Klikring
This page includes the Klikring (a fully 3D printed keyring that opens and closes with a click mechanism), an easily customizable OpenSCAD file for a keychain tag, and a demo model of what you can make with the parameters.
Customization
To customize, you will need OpenSCAD. Once the file is opened up, its a simple matter of adjusting the variables at the top to suit your needs.
Printing Instructions
- (for the ring) Make sure to use a layer height of 0.16mm!
- The model has only been tested to be working printed as this resolution. Higher or lower may work, but no guarantees.
- PLA is what was used for the ring in the video. Probably a better idea to use something stronger like PETG.
- If you have a lighter filament like the blue one in the video, there is no need for multicolor/filament swap to highlight the text, going over with a marker works just fine
Demo Video (Opening/Closing the ring):
As seen in the video, simply slot the ring into the clasp and then rotate it into the small slots.