1 / 2
Klikring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable keychain that is all fully printed, including the ring
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Klikring
This page includes the Klikring (a fully 3D printed keyring that opens and closes with a click mechanism), an easily customizable OpenSCAD file for a keychain tag, and a demo model of what you can make with the parameters.
Customization
To customize, you will need OpenSCAD. Once the file is opened up, its a simple matter of adjusting the variables at the top to suit your needs.
Printing Instructions
- (for the ring) Make sure to use a layer height of 0.16mm!
- The model has only been tested to be working printed as this resolution. Higher or lower may work, but no guarantees.
- PLA is what was used for the ring in the video. Probably a better idea to use something stronger like PETG.
- If you have a lighter filament like the blue one in the video, there is no need for multicolor/filament swap to highlight the text, going over with a marker works just fine
Demo Video (Opening/Closing the ring):
As seen in the video, simply slot the ring into the clasp and then rotate it into the small slots.