Losi XXCR Rear Shock Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear shock tower for Losi XX buggy. This should fit XX, XXCR, or XXCRKE. Was modeled from an XXCRKE.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Rear shock tower for Losi XX buggy. This should fit XX, XXCR, or XXCRKE.
Post-Printing
You will need to drill out the hole for body mounting in the post. The hole will be present but need enlarging depending on the size of clips used.
I have purposely kept the wing mount holes small to support varying size piano wire, drill these out if you use a thicker wire.
You also may wish to open up the mounting holes for ease of installation, a 5/64 bit works here. leave the shock mounting holes as printed. A 4-40 screw will thread in easily but provide enough resistance for removal and installation of the shock mounting nut.
How I Designed This
Designed with Tinkercad measuring from original
Category: R/C Vehicles