FRC Crescendo Note Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold to create your own Note for FRC 2024 competition.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're struggling to find additional foam notes for Crescendo, this solution is under testing (process works, still getting correct foam density).
Print:
- 4x Base Parts
- 3x Vent Parts
- 1 Pour Part
You will also need:
- (16 or 32) M5 x 45mm or longer [10-32, 2" is close equivalent]
- (16 or 32) M5 hex nut [10-32 is close equivalent]
- (16) 3mm x 16mm dowel pin [to align parts]
- CA Glue [to permanently attach top and bottom rings]
Optional:
- Bondo or other fillers to reduce seams
- Sandpaper
I recommend attaching half of the holes, skipping every other and staggering the inner and outer rings. If you do everything you'll need 32 fasteners + nuts. STEP files are provided so you can make your own tweaks.
More instructions will be added for foam materials and release agent in the coming days (last updated 01/15/2024).
PLA, PETG are good candidate materials.