1 / 3
FRC Crescendo Note Mold
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mold to create your own Note for FRC 2024 competition.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 68
- Makes
- 0
- Views
- 853
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
If you're struggling to find additional foam notes for Crescendo, this solution is under testing (process works, still getting correct foam density).
Print:
- 4x Base Parts
- 3x Vent Parts
- 1 Pour Part
You will also need:
- (16 or 32) M5 x 45mm or longer [10-32, 2" is close equivalent]
- (16 or 32) M5 hex nut [10-32 is close equivalent]
- (16) 3mm x 16mm dowel pin [to align parts]
- CA Glue [to permanently attach top and bottom rings]
Optional:
- Bondo or other fillers to reduce seams
- Sandpaper
I recommend attaching half of the holes, skipping every other and staggering the inner and outer rings. If you do everything you'll need 32 fasteners + nuts. STEP files are provided so you can make your own tweaks.
More instructions will be added for foam materials and release agent in the coming days (last updated 01/15/2024).
PLA, PETG are good candidate materials.