Toilet paper holder ft. IKEA Tisken
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to install, minimalistic toilet paper holder, utilizing the IKEA Tisken towel hanger suction cup.
- Ocena
- 4 / 5
- Polubienia
- 43
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This toilet paper holder design allows you to save both space in your bathroom and your tiles from the drilling machine. You can find the IKEA Tisken towel hanger, needed for the installation, on the link below.
https://www.ikea.com/pl/pl/p/tisken-wieszak-z-przyssawka-bialy-70381275/
Printing the parts is fairly easy, the case and the shaft need to be supported on the overhanging areas, as you can see on the picture below. I would recommend using the “Snug” supports, and marking the areas manually, using the “Smart fill” option.

Once the parts are printed and cleaned up, you will need to remove the little hook from your Tisken towel hanger, and install it in its final place on your bathroom wall.

Slide the case down on the hanger.

Insert the bottom part.

Finally, slide a toilet paper roll on the shaft, align the pins of the shaft with the cutouts on the bottom (red) part, push the shaft into the case and twist it counterclockwise, to secure it in place. The toilet paper holder is now ready to use. :)

Happy printing!