MUFGA Indoor Gardening System - Hole Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty design to cover the unused holes on the MUFGA Hydroponic system.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 815
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This simple cover design features a groove on the bottom of the cover to keep it in place and not slide off the unused hole/opening.
Need a holder to keep all unused covers together so you don’t lose them? Get that file here.
Don't have a 3D Printer? You can purchase covers HERE
Each cover uses only ~3g of filament
Covering unused holes/openings will not only help reduce evaporation but will also help prevent algae growth inside your MUFGA Indoor Gardening System's tank. Which is obviously not good for plant health.
Print Settings
- Printer Brand: Creality
- Printer: Ender-3 v2
- Rafts: No
- Supports: No
- Resolution: .2 mm
- Infill: 20%
- Filament brand: Hatchbox
- Filament material: PLA
Print orientation should be done as shown below:

NOTE - These covers should be printed with a dark/black filament to prevent light from passing through it.
