NYS Business card embosser roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Emboss your business card with New York State. Simple assembly required.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 2176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
***NOTE*** I removed my name "FLYNN" from these files, so it is just a NYS Card embosser with room on the top if you wish to make custom roller with your name on top
Print 1 of all STL files except handle
Print a 2nd STL file of gear 1, gear 2, and side
Print choice of handle (one handle has its own plastic drive, the other has a hole for a .25 x .25 shaft. The one in image has a wood shaft made from black locus wood)
Assembly:
-Put one roller on each shaft.
-Put both matching gears on a shaft (ie: both gear 1 on same shaft, both gear 2 on other shaft)
-align roller images and put shaft ends through sides
- Identify roller shaft without hole. Put that end into the base (see photo)
-put on handle with drive shaft (no stl file for shaft) or without drive shaft. Image has handle with drive shaft.