NYS Business card embosser roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Emboss your business card with New York State. Simple assembly required.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 105
- Makes
- 0
- Views
- 2,169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
***NOTE*** I removed my name "FLYNN" from these files, so it is just a NYS Card embosser with room on the top if you wish to make custom roller with your name on top
Print 1 of all STL files except handle
Print a 2nd STL file of gear 1, gear 2, and side
Print choice of handle (one handle has its own plastic drive, the other has a hole for a .25 x .25 shaft. The one in image has a wood shaft made from black locus wood)
Assembly:
-Put one roller on each shaft.
-Put both matching gears on a shaft (ie: both gear 1 on same shaft, both gear 2 on other shaft)
-align roller images and put shaft ends through sides
- Identify roller shaft without hole. Put that end into the base (see photo)
-put on handle with drive shaft (no stl file for shaft) or without drive shaft. Image has handle with drive shaft.