NEW: 6 styles! Trash Tray (Pooptray) for Elegoo Neptune 3 & 4 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trash Trays for both sides for the Elegoo Neptune 4 Plus.
- Ocena
- 4,667 / 5
- Polubienia
- 192
- Pobrania
- 1137
- Wydruki
- 11
- Wyświetlenia
- 6166
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 02.04.2024:
Based on the existing feedback, the bottom was increased by 100% and the walls by 50% to make the tray more stable. In addition, the cut-out in the “bed alignment”-version has been designed to fit even more precisely. Minor adjustments have also been made.
A shorter version is now also available, which saves printing time and material (~34% less).
Update 19.02.2024:
A Trash Tray / Pooptray for the right side is now available! See photos.
Update 30.01.2024:
Modified version provided if you are using the bed alignment guide. See last photos.
Summary
Based on the model I have made the necessary adjustments for an Elegoo Neptune 4 Plus.
Fits perfectly on the screws and does not slip.
Compatibility
Fits the Elegoo Neptune 3 Plus and Neptune 4 Plus.
Print
No supports are needed!
I recommend printing in PETG due to the close proximity to the heating bed, but PLA should also be fine.
Due to the low complexity of the model, a print with a layer height of 0.3 mm is also fine.
Do you like my work? I would be very happy if you would support my work on Ko-fi.