1 / 2
Remote Caddy for Samsung and Apple TV — zdjęcie 1
1 / 2

Remote Caddy for Samsung and Apple TV

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple two remote holder for standard Samsung and Apple TV remotes. Optional TPU rubber inserts to dampen noise.

Ocena
5 / 5
Polubienia
12
Pobrania
91
Wydruki
2
Wyświetlenia
377
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Simple remote holder. You can use it free standing or attached to a wall using 3M command strips. I've included two extra bits - large and small TPU/rubber inserts if you wish to dampen the clacky sound of plastic-on-plastic when you are putting the remote into the caddy. The remotes fit great with the TPU inserts. If you leave the inserts out, you can fit even chunkier remotes. If attaching to a wall, I'd recommend using the TPU inserts. 

With TPU inserts -

  • Large slot: 50.5mm x 27mm 
  • Small slot: 50.5mm x 12mm

Without TPU inserts -

  • Large slot: 54.5mm x 31mm
  • Small slot: 54.5mm x 16mm

Print Settings: 

  • Holder:
    • Printer: Creality Ender 3 S1
    • I used standard Inland brand matte finish PLA (nozzle temp 215C, bed temp 60C)
    • Print speed: 150mm/sec with regular filament as pictured
    • Supports: no
    • Infill: 15%
  • TPU Inserts:
    • Printer: Creality Ender 3 S1
    • Inland brand black TPU (nozzle temp 225C, bed temp 40C)
    • Print speed: 50mm/sec
    • Supports: no
    • Infill: 10%

Tagi