Darning Mushroom with storage and wide stalk base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Darning mushroom with storage in stalk, and wide bulb at base of stalk for comfort. Sized for use with common hair bands
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 363
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Designed in FreeCAD. FreeCAD file provided to allow modifications, such as a longer stem, thicker or thinner bulb, different mushroom cap curvature, etc.
Print at least the cap with fine layers and plenty of top layers, and enough perimeters that the top section of the stem has no infill. You want enough top layers to sand it down smooth after printing, so that the needle doesn't catch on layer lines. No supports needed when printed with 0.12mm layers in ABS. Acetone vapor smoothing optional but possible with ABS.