Flexible and posable display arm for Dummy 13 on the HSW (honeycomb storage wall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your Dummy 13 on the HSW
- Ocena
- 4,5 / 5
- Polubienia
- 239
- Pobrania
- 959
- Wydruki
- 2
- Wyświetlenia
- 5234
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
===UPDATE February 2, 2024
Added Desk / Tabletop Base for HSW Display Arm so you can now have it on your desk or tabletop.
Also verified that this seems to work just fine with PLA
Print Profile is available: HERE
Also pictured: Batman (Dummy 13 variant) & Screw Top Container to hold your extra parts
===ORIGINAL POST
He's a way to display and pose your Dummy 13 on your HSW. I remixed the insert, adapter, and joints to make a flexible way show off your figures.
You can print as many connector pieces as you need, I used 6.
ONLY printed and tested with PETG as PLA usually cracks when you snap the pieces together.
===
Newest models are available at: BRE3DLOVE.com
===