Honeycomb wall standard rectangular border
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard borders for honeycomb for 3x4 structure (but may work also for other sizes)
- Ocena
- 4,818 / 5
- Polubienia
- 2070
- Pobrania
- 5179
- Wydruki
- 22
- Wyświetlenia
- 32 930
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded.
UPDATE 16/02/2024: added folder with other filler size, in case you are using different model than the 211x201
UPDATE 07/07/2024: added folder with angles for prusa mini sizes
---
My first upload, I've been searching for an enclosure for the honeycomb, and I've found the Parametrized openSCAD project, it was nice, but this is not really a customization, it's just a squared enclosure for a matrix of standard sized honeycomb wall storage.
I've used the model wall-honeycomb-k1-211x201.stl from original HSW since it fits perfectly the prusa mk4 printing area.
hope it will save some time for someone else!
Printing settings (inherited from original HSW)
- layer height: 0.25 - 0.3
- perimeters: 3 (or more - without infill for faster printing)