Honeycomb wall standard rectangular border
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard borders for honeycomb for 3x4 structure (but may work also for other sizes)
- Rating
- 4.818 / 5
- Likes
- 2,070
- Downloads
- 5,179
- Makes
- 22
- Views
- 32,930
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded.
UPDATE 16/02/2024: added folder with other filler size, in case you are using different model than the 211x201
UPDATE 07/07/2024: added folder with angles for prusa mini sizes
---
My first upload, I've been searching for an enclosure for the honeycomb, and I've found the Parametrized openSCAD project, it was nice, but this is not really a customization, it's just a squared enclosure for a matrix of standard sized honeycomb wall storage.
I've used the model wall-honeycomb-k1-211x201.stl from original HSW since it fits perfectly the prusa mk4 printing area.
hope it will save some time for someone else!
Printing settings (inherited from original HSW)
- layer height: 0.25 - 0.3
- perimeters: 3 (or more - without infill for faster printing)