Stand for Wurth Activator and Glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Wurth Activator and Glue
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Hello Everyone
I designed the stand for Wurth products suitable for the Cyanoacrylate Glue Activator with a capacity of 150ml 0893 301 20 and for the Klebfix Easy Pen Cyanoacrylate Glue with DOS System 30grams 0893 090 030. In the middle of the stand there is also a small organizer which I use for cleaning cloths and disposable plastic needles for precise glue dosing. The hole diameter for the Activator is 53.2mm and for the glue 42mm. You can download a file in *.STL or *.3MF format which contains a model with a colorful logo.
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
IMPORTANT - READ :
Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments. I tested the project on PLA filaments from brands such as Bambu Lab, Fiberlogy and Polymaker. Each time the size after printing was perfect for the Wurth Stand. Download a file for a size test print.
How to print ? :
- Material : Any (I tested with PLA)
- Layer Height : 0.2mm
- Wall Loops : 2
- Top Layers : 4
- Bottom Layers : 4
- Support : No
- Brim : No