Stand for Wurth Activator and Glue
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for Wurth Activator and Glue
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 105
- Makes
- 0
- Views
- 1,495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License
Hello Everyone
I designed the stand for Wurth products suitable for the Cyanoacrylate Glue Activator with a capacity of 150ml 0893 301 20 and for the Klebfix Easy Pen Cyanoacrylate Glue with DOS System 30grams 0893 090 030. In the middle of the stand there is also a small organizer which I use for cleaning cloths and disposable plastic needles for precise glue dosing. The hole diameter for the Activator is 53.2mm and for the glue 42mm. You can download a file in *.STL or *.3MF format which contains a model with a colorful logo.
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
IMPORTANT - READ :
Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments. I tested the project on PLA filaments from brands such as Bambu Lab, Fiberlogy and Polymaker. Each time the size after printing was perfect for the Wurth Stand. Download a file for a size test print.
How to print ? :
- Material : Any (I tested with PLA)
- Layer Height : 0.2mm
- Wall Loops : 2
- Top Layers : 4
- Bottom Layers : 4
- Support : No
- Brim : No