AOS 3.5 EVO V2 Arm Bumpers, light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lighter version of Arm Bumpers for the AOS 3.5 Frame
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
As I was building the AOS 3.5 I needed to shave off some weight to get under the 250g mark. I found the stock Armguards to be quite heavy but didn't want to let the carbon totally unprotected.
I tried out the several light armguards for the AOS 3.5 on Available and apparently the form of the arms have changed in the O3 EVO Version of the frame.
Therefore I made a light Version based on the original form of Chris Rossers Armguards (https://www.thingiverse.com/thing:5982701).
You can easily cut the part if you like to use only two screws.
Printing
Print slowly in TPU (I used TPU 95A)
Use treesupport if the slicer supports it.