AOS 3.5 EVO V2 Arm Bumpers, light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lighter version of Arm Bumpers for the AOS 3.5 Frame
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
As I was building the AOS 3.5 I needed to shave off some weight to get under the 250g mark. I found the stock Armguards to be quite heavy but didn't want to let the carbon totally unprotected.
I tried out the several light armguards for the AOS 3.5 on Available and apparently the form of the arms have changed in the O3 EVO Version of the frame.
Therefore I made a light Version based on the original form of Chris Rossers Armguards (https://www.thingiverse.com/thing:5982701).
You can easily cut the part if you like to use only two screws.
Printing
Print slowly in TPU (I used TPU 95A)
Use treesupport if the slicer supports it.