1 / 1
THOKK Glove Safety mods - WRIST & FINGERS — zdjęcie 1

THOKK Glove Safety mods - WRIST & FINGERS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extra protective plate for the THOKK HEMA gloves to make them actually protect the wrists

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
540
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

These are my safety mods for the Thokk gloves. They're intended to fit my L's as they were the only glove size I could test these with directly, I added a variety of sizes for wrist plates, but for the finger segments if you have smaller gloves you may have to trim yourself. If you have a different sized glove and something can be improved/fixed, let me know and I can update the files. Shoot me a message on the 3D printing HEMA Discord and I'll get back to you when I can.

Please note that while this will help the protective nature of the gloves, they do not mitigate the risk of injury entirely. Use at your own risk, I am not responsible for injuries sustained while using these mods.

I printed everything at 0.24mm layer heights. Make sure you use a flexible plastic, such as ABSg, ASA, or PETG (or somethin of that nature). Do not use PLA, it is too brittle.

You can find my article about these here:
https://www.thccs.ca/reviews-and-articles/thokk-gloves-wrist-mod#/

And my accompanying video about these here: https://youtu.be/Y_bW3wSyoR0