1 / 1
THOKK Glove Safety mods - WRIST & FINGERS — image 1

THOKK Glove Safety mods - WRIST & FINGERS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extra protective plate for the THOKK HEMA gloves to make them actually protect the wrists

Rating
0 / 5
Likes
4
Downloads
21
Makes
0
Views
538
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial

These are my safety mods for the Thokk gloves. They're intended to fit my L's as they were the only glove size I could test these with directly, I added a variety of sizes for wrist plates, but for the finger segments if you have smaller gloves you may have to trim yourself. If you have a different sized glove and something can be improved/fixed, let me know and I can update the files. Shoot me a message on the 3D printing HEMA Discord and I'll get back to you when I can.

Please note that while this will help the protective nature of the gloves, they do not mitigate the risk of injury entirely. Use at your own risk, I am not responsible for injuries sustained while using these mods.

I printed everything at 0.24mm layer heights. Make sure you use a flexible plastic, such as ABSg, ASA, or PETG (or somethin of that nature). Do not use PLA, it is too brittle.

You can find my article about these here:
https://www.thccs.ca/reviews-and-articles/thokk-gloves-wrist-mod#/

And my accompanying video about these here: https://youtu.be/Y_bW3wSyoR0