N5105 Mini PC stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
N5105 Mini PC missing rubber feet replacement stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I've received a N5105 mini pc from a friend, but the rubber pads at the bottom was missing. Instead of trying to source rubber pads, I've come up with this stand. The goal was to lift the unit from the surface it's placed on, to stop the SSD mounting screws from potentially scratching said surface as well as to allow some additional airflow.
The bottom plate on the original casing has 4 rubber pad holders slightly recessed into it. This fits snugly on-top of the stand which will raise the unit 10mm from the surface it's placed on.
Printed in eSun PETG since the unit can run a little hot.
There's another much better model for this here, which I only found after creating this. I'm sharing mine anyway as someone might still find it useful.